加拿大28

加拿大28Welcome to Dongguan Tai Fu Machinery Co., Ltd. official website

Dongguan Tai Fu Machinery Co., Ltd.

Dongguan Tai Fu Machinery Co., Ltd.

Focus on the production and manufacture of injection molding machine for 10 years, national high-tech enterprise

South China:136-8666-5453

East China:139-2550-8791

Contact
TEL:13686665453

Contacts:Manager Zeng
phone:13925508791
Email:2994331754@qq.com
加拿大28 address:Fulong Yangwu Industrial Zone,Shipai Town,Dongguan City,Guangdong Provice,China

history record

Vertical Injection Molding Machine Unable to Inject Treatment Method

source:   time:2019-06-27   Click:280

The nozzle is a key part of 加拿大28vertical injection moulding machine. If there is a problem in the nozzle part, it will affect the operation of the whole vertical injection moulding machine or even suspend operation, directly affecting factory production. Today, I came to tell you what to do if the nozzle can't shoot plastic. Following is a brief analysis and solution:

a) The nozzle is blocked by foreign bodies. Check whether the nozzle is blocked. Clean or replace nozzle.

b) The parting nozzle is broken. Remove the flange to check whether the separating nozzle is broken. Replace the tap.

c) The jetting direction valve is stuck。 Check whether the directional valve has 24V voltage, coil resistance 15-20 ohms, if normal, the valve is blocked。 Clean valve or replace direction valve。

d) The injection piston rod is broken。 Loosen the rubber piston rod tightener and check whether the piston rod is broken。 Replace piston rod。

e) The barrel temperature is too low. Check whether the actual temperature reaches the required melting point temperature of the material. Reset the barrel temperature.

f) Injection piston oil seal damaged。 Check whether the piston oil seal is broken。 Replace the oil seal。

This article is an original article of Dongguan Taifu Machinery Co., Ltd. (Official Website: www.dg-taifu.com/加拿大28www.whosben.com). It shall not be reproduced without permission.

Popular tags:Vertical Injection Molding Machine
CONTACT THE TAIFU

Contact: Manager Zeng

Mobile phone:13925508791

Fax:0769-81929375

email:加拿大282994331754@qq.com

加拿大28Address: Fulong Yangwu Industrial Zone,Shipai Town,Dongguan City,Guangdong Provice,China

加拿大28Copyrights©2018 Dongguan Tai Fu Machinery Co., Ltd. All Rights Reserved case number:

澳门网上彩票合法么 拉斯维加斯官网 幸运飞艇官网 博赢彩票官网 娱乐平台注册送38现金 壹号彩票注册 福建快3开奖 大乐购彩票计划群 利来彩票开户 疯狂斗牛